L6712ADTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 165kHz |
| Base Part Number | L6712 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7.5V~15V |
| Quiescent Current | 10mA |
| Control Features | Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 10.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 150kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 80 % |
| Clock Sync | No |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
L6712ADTR Overview
It comes in the 28-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). 7.5V~15V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. The switching controller can be switched at 150kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control, Phase Control, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . Various 28 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "L6712" will reveal other relevant dc to dc converter ics. Pins number 28 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 10.8V is the minimum required for the dc dc voltage regulator. DC regulator outputs 3.3V voltage based on test statistics. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 80 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 165kHz is the frequency of the switching controller. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 13.2V. Switching converter outputs current to the greatest value of 2A. When the dc switching is dormant, it uses 10mA.
L6712ADTR Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 165kHz
L6712ADTR Applications
There are a lot of STMicroelectronics L6712ADTR DC to DC converter applications.
- Industrial robots
- Current source circuits
- Computer application technology
- Machining centers
- Magnetohydrodynamic power
- Nuclear power plants
- Various precision measuring detectors
- Game consoles
- Serial communication converter
- Digital display device
