L6712AQ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6712 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 70A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~15V |
| Quiescent Current | 10mA |
| Control Features | Frequency Control, Phase Control, Power Good |
| Max Output Voltage | 3.3V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz |
| Max Input Voltage | 12V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 178kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Height | 880μm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6712AQ Overview
It comes in a 36-VFQFN Exposed Pad package, so switching controller can be used for most applications. For outputs of 2, this dc motor controller is suitable. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 7.5V~15V. Qualified to work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 150kHz. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Phase Control, Power Good. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a QUAD terminal on the switching converters. Different dc switching's functions can be applied to 36 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "L6712". Total pins of switching converter are 36. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 3.3V voltage. You should note down the dc dc regulator's usual output current of 70A when you start a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThis dc regulatorhas a max frequency of 178kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 13.2V. When the dc switching is dormant, it uses 10mA. Because the dc switcher's maximum input voltage is 12V users must limit the voltage accordingly. Datasheets state the switching converter can output up to 3.3V volts. Neither the voltage controller's lowest voltage output 900mVr its highest voltage output is less than 900mV.
L6712AQ Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
L6712AQ Applications
There are a lot of STMicroelectronics L6712AQ DC to DC converter applications.
- Precision electronic equipment
- Magnetohydrodynamic power
- Low output voltage switching power supply circuits
- Post equipment
- Solar power plants
- Scientific testing
- Computer rooms
- Boring machines
- Various CNC machine tools
- ATMs
