L6712Q
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6712 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 70A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~15V |
| Quiescent Current | 10mA |
| Control Features | Frequency Control, Phase Control, Power Good |
| Max Output Voltage | 3.3V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz |
| Max Input Voltage | 12V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 178kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Height | 880μm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6712Q Overview
With a 36-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 2 outputs. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. A 7.5V~15V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to 150kHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Phase Control, Power Good. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a QUAD terminal on the switching converters. 36 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. In addition to "L6712", there are other relevant dc to dc converter ics you can find. There are 36 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 3.3V voltage based on test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 70A. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 178kHz for this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 13.2V to ensure safety and reliability. Dormant dc switchings use 10mA. Since the dc switcher's maximum input voltage is 12V, the voltage must be regulated accordingly. The switching converter can output 3.3V volts at its utmost, according to the datasheet. The voltage controller's lowest voltage output is not less than 900mV.
L6712Q Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
L6712Q Applications
There are a lot of STMicroelectronics L6712Q DC to DC converter applications.
- Handheld GPS
- Electric water heaters
- Game consoles
- Domestic water pumps
- Magnetohydrodynamic power
- SMT equipment
- Electric heating, lighting
- Special machining machine tools
- Serial communication converter
- PSRR circuits
