L6726ATR

8 Terminals 4.1V~13.2V 8-Pin L6726 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 270kHz Transistor Driver

Manufacturer: STMicroelectronics
Nocochips NO: 761-L6726ATR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 548
Description: 8 Terminals 4.1V~13.2V 8-Pin L6726 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 270kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	506.605978mg
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	L6726
Function	Step-Down
Number of Outputs	1
Output Voltage	800mV
Output Type	Transistor Driver
Operating Supply Voltage	13.2V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	6mA
Output Configuration	Positive
Output Current	1.5A
Voltage - Supply (Vcc/Vdd)	4.1V~13.2V
Max Supply Current	6mA
Control Features	Enable, Frequency Control, Phase Control, Power Good
Input Voltage (Min)	5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	270kHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Max Frequency	315kHz
Max Duty Cycle	80 %
Clock Sync	No
Height	1.25mm
Length	5mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

L6726ATR Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 4.1V~13.2V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~150°C TJ. There is a switch at 270kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Power Good. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 8 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. L6726 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 5V. The test statistics indicate that DC regulator outputs a voltage of 800mV. The dc dc regulator's usual output current is 1.5A, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 80 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator315kHz has the maximum frequency. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 13.2V. Having a current greater than 6mA may result in improper operation and possibly damage to the component. The nominal supply current for this the controllers dc is 6mA.

L6726ATR Features

Transistor Driver Outputs
Switching Frequency: 270kHz
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %