L6728AHTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | L6728 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 5V~12V |
| Max Supply Current | 6mA |
| Control Features | Enable, Phase Control, Power Good |
| Input Voltage (Min) | 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Max Frequency | 660kHz |
| Max Duty Cycle | 67 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6728AHTR Overview
This switching controller fits most application requirements since it is packaged in a 10-VFDFN Exposed Pad package. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. 5V~12V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 600kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Phase Control, Power Good provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 10 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. Other relevant dc to dc converter ics can be found by searching "L6728". In total, switching converter has 10 pins. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 5V. Statistically, DC regulator outputs 800mV volts. normally, the dc dc regulator's output current is 1.5A, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 67 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The max frequency of the pmic can reach 660kHz. A current of 6mA is supplied to it. In the presence of a current greater than 6mA, the component may fail to operate properly and may be damaged.
L6728AHTR Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Phase Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 67 %
L6728AHTR Applications
There are a lot of STMicroelectronics L6728AHTR DC to DC converter applications.
- Adjustable voltage or current linear circuits
- Imported equipment
- Communication system
- Experimental setup
- Serial communication converter
- Electric heating, lighting
- seismic instrument power circuits
- Scientific testing
- Precision electronic equipment
- Hydrogen power
