L6743DTR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L6743 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1.15W |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A - |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| High Side Voltage - Max (Bootstrap) | 41V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lifecycle Status | NRND (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.15W |
| Voltage - Supply | 5V~12V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
L6743DTR Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A package of Tape & Reel (TR) has been used.Gate drivers is configured wGate driversh 2 drivers.Surface Mount is mounted in the way.In the absence of a 5V~12V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.Temperature range 0°C~125°C TJ is allowed for this device.Non-Inverting is used as the input type.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number L6743.You mount it with Surface Mount.When the device is designed, it has 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.8 pins are present on the component.A boot strap voltage of 41V is the maximum possible high-side voltage.This device has a maximum power dissipation of 1.15W, indicating that it is capable of reducing power loss without overheating.
L6743DTR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 41V
Maximum power dissipation of 1.15W
L6743DTR Applications
There are a lot of STMicroelectronics L6743DTR gate drivers applications.
- Broadcast equipment
- Solar inverters
- PCMCIA applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High frequency line drivers
- Industrial Motor Inverter - Power Tools, Robotics
- Active filtering
- Line drivers
- Smart Phones
