L6910
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6910 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 9mA |
| Output Configuration | Positive |
| Output Current | 1.3A |
| Voltage - Supply (Vcc/Vdd) | 5V~12V |
| Max Supply Current | 9mA |
| Control Features | Current Limit, Frequency Control, Phase Control, Power Good, Soft Start |
| Max Output Voltage | 913mV |
| Topology | Buck |
| Min Input Voltage | 5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Max Input Voltage | 12V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 886mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Isolation | Non-Isolated |
| Clock Sync | No |
| Height | 1.65mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
L6910 Overview
With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). 5V~12V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~150°C TJ. This switching controller can switch at 200kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Current Limit, Frequency Control, Phase Control, Power Good, Soft Start is included in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. Different dc switching's functions can be applied to 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Search for "L6910" to find other relevant dc to dc converter ics. 16 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. A 900mV voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 1.3A, so note that when you start the project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is 1MHz frequency setting on the switching controller. When running the voltage regulator dc to dc in a circuit, users should apply 12V to ensure safety and reliability. The dc switcher's maximum input voltage is 12V, so users must limit the voltage accordingly. Voltage 5V must be supplied. As per its datasheet, the switching converter has a maximum output of 913mV volts. It runs on a 9mA supply current. The voltage controller's lowest voltage output is not less than 886mV. There is a possibility of damage to the component if the switching voltage regulators current exceeds 9mA.
L6910 Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
L6910 Applications
There are a lot of STMicroelectronics L6910 DC to DC converter applications.
- Computer-related products
- ATMs
- Bending machines
- Domestic water pumps
- Series voltage regulation circuits
- Special machining machine tools
- Handheld GPS
- Automatic testing equipment
- Digital video recorders
- Computed tomography (CT)
