L6910ATR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6910 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.3A |
| Voltage - Supply (Vcc/Vdd) | 5V~12V |
| Quiescent Current | 7mA |
| Control Features | Current Limit, Frequency Control, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 230kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6910ATR Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 5V~12V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~150°C TJ dc switcher. There is a switch at 200kHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Frequency Control, Phase Control, Power Good, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 16 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics can be found by searching "L6910". The switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 5V. As determined by the test statistics, the output voltage of DC regulator is 900mV. normally, the dc dc regulator's output current is 1.3A, which you should keep in mind when starting a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. 230kHz is the maximum frequency of this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. DC switchings that are dormant use 7mA.
L6910ATR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
L6910ATR Applications
There are a lot of STMicroelectronics L6910ATR DC to DC converter applications.
- Laboratories
- Lathes
- Electrical power transmission
- Analog precision reference circuits
- Printing equipment
- Emergency lighting monitoring equipment
- Ball screw pair
- USB circuits
- Remotely powered electric motors
- Shearing machines
