Parameters |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
L6928 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
95 % |
Output Voltage |
5.5V |
Output Type |
Adjustable |
Max Output Current |
800mA |
Voltage - Input (Min) |
2V |
Input Voltage-Nom |
3.6V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
230μA |
Output Configuration |
Positive |
Max Output Voltage |
5.5V |
Voltage - Output (Min/Fixed) |
0.6V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
1.4MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
600mV |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
L6928D013TR Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. There are 8 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The voltage regulator 12v has 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. This switching regulator is designed to fit the Surface Mount mounting system. As long as its operating temperature is -40°C~150°C TJ, dc to dc voltage regulator should perform well. There is a switching frequency of 1.4MHz for this voltage regulator 12v. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. To meet the switching regulator operation requirements, a nominal input voltage of 3.6V is provided. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. In this case, the DC/DC regulator belongs to the family L6928. There is a possibility that DC DC switching regulator can give voltage at 5.5V volts. During switching regulator operation, 8 pins are used. The output voltage of this voltage regulator 12v should at least be set at 600mV volts at all times. A 800mA A maximum output current is required to meet the switching regulator operation requirements. There is a maximum output voltage of 5.5V from this voltage regulator 12v.
L6928D013TR Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
L6928D013TR Applications
There are a lot of STMicroelectronics L6928D013TR Voltage Regulators applications.
- Bending machines
- Production lines
- Nuclear power plants
- Arc suppression circuits
- Medical equipment
- Linear guide
- Refrigerators of central air conditioners
- Direct power supply system
- SMT equipment
- Computer monitoring equipment of building