L6995STR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | L6995 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.3V~6V |
| Quiescent Current | 600μA |
| Output Power | 1W |
| Control Features | Current Limit, Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 270kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | No |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6995STR Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 4.3V~6V is the operating voltage and supply voltage of the dc control. Suitable for work in a 0°C~125°C TJ dc switcher. With this switching controller, you can switch at 270kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Phase Control, Power Good, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 20. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. You can find other relevant dc to dc converter ics by searching "L6995". Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 4.5V. This dc to dc regulator accepts only 5.5V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. The dc switching utilizes 600μA when it is in a dormant state.
L6995STR Features
Transistor Driver Outputs
Switching Frequency: 270kHz
Current Limit, Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
L6995STR Applications
There are a lot of STMicroelectronics L6995STR DC to DC converter applications.
- Television equipment
- Communication system
- Balance equipment
- Boring machines
- Program control systems
- Analog precision reference circuits
- Smoke prevention equipment
- Smart grid
- Solar power plants
- Medical monitoring systems
