L9222
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~5.25V |
| Driver Number of Bits | 4 |
| Output Peak Current Limit-Nom | 1.2A |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -55°C |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | L9222 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | Bipolar |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 7V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Interface | On/Off |
| Nominal Supply Current | 90mA |
| Output Configuration | High Side |
| Output Current | 900mA |
| Propagation Delay | 20 μs |
| Input Type | Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
L9222 Overview
It is packaged in the form of a Tube.This file is included in package 16-DIP (0.300, 7.62mm).This LED driving board is mounted using the mounting type Through Hole.There is a switch type of General Purpose.The lighting driver is equipped with 4 outputs that can be used.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It belongs to the L9222 family.There are 16 terminations in it.During operation, the 16 pins are used.Currently, the lighting driver has a total of 4 functions.To meet the operation criteria, the maximum output current drops to 1.2A.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Through Hole.16 pins are connected to it in total.The output current is set to 900mA in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The Vsup value (maximum supply voltage) is set to 5.25V.It has a power supply of 5V.It is recommended to set the supply voltage to 7V for optimum efficiency.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.Reliability is ensured by operating at a minimum working temperature of -55°C degrees Celsius.
L9222 Features
Supplied from 5V
L9222 Applications
There are a lot of STMicroelectronics L9222 Power Switches ICs applications.
- HDD and SSD
- Hot Swaps
- Hot-Swap Systems
- Portable GPS Device
- Telecom and Network Systems
- Solid-State Drives
- USB3.1 Power Delivery
- USB Power Distribution
- HDD, SSD
- PC Cards
