L9333MD-TR
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9333 |
| Pin Count | 20 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | Low Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 45V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Fault Protection | Over Temperature |
| Number of Drivers | 4 |
| Turn On Time | 3.5 µs |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Drain to Source Resistance | 3.8Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
L9333MD-TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 20-SOIC (0.295, 7.50mm Width).It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.It is equipped with Status Flag features.It belongs to the family L9333.It contains 20 terminations.For operation, we use the 20 pins.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 700mA.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 20 pins.It has 1.7Ohm resistance.The output current is set to 1A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The Vsup value (maximum supply voltage) is set to 32V.The part has 4 drivers.
L9333MD-TR Features
Resistance of 1.7Ohm
L9333MD-TR Applications
There are a lot of STMicroelectronics L9333MD-TR Power Switches ICs applications.
- PDAs
- USB3.1 Power Delivery
- Wireless/Networking Cards
- Portable Video Game Players
- PC Cards
- Various applications equipped with buttons
- Wearable Devices
- Solid State Drivers
- Notebook PC
- Mobile Communication Devices
