L9337MD/TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.7Ohm |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L9337 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3.5 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Fault Protection | Over Temperature |
| Number of Drivers | 3 |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Drain to Source Resistance | 3.5Ohm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
L9337MD/TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 20-SOIC (0.295, 7.50mm Width).This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.I believe it belongs to the L9337 family.A total of 20 terminations have been found in it.For operation, 20 pins are used.As far as functions are concerned, the lighting driver has 3.In order to meet the operation criteria, the maximum output current drops to 200mA.The supply voltage can be 14V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 20 pins.It has a resistance of 1.7Ohm.This case results in a 200mA output current.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.It has 3 drivers in the part.
L9337MD/TR Features
Supplied from 14V
Resistance of 1.7Ohm
L9337MD/TR Applications
There are a lot of STMicroelectronics L9337MD/TR Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swap
- Smart Phones, Feature Phones
- Set-Top Boxes
- Portable/Handheld Devices
- USB Power Distribution
- Wireless Headsets
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Hot Swaps
