L9338MD/TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9338 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | Low Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Fault Protection | Over Temperature |
| Number of Drivers | 4 |
| Turn On Time | 3.5 µs |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Drain to Source Resistance | 3.5Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
L9338MD/TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 20-SOIC (0.295, 7.50mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It is part of the L9338 family of LED drivers.The termination count is 20.The operation is performed through the 20 pins.It consists of 4 functions.As long as the supply voltage is 14V, high efficiency can be achieved.It is mounted in the way of Surface Mount.The output current is set to 1.2A in this case.The lighting driver is configured to have a maximum supply voltage of 32V (Vsup).There are 4 drivers associated with this part.
L9338MD/TR Features
Supplied from 14V
L9338MD/TR Applications
There are a lot of STMicroelectronics L9338MD/TR Power Switches ICs applications.
- Set-top-box
- PC Cards
- PC Card Hot Swap
- PDAs
- USB Power Distribution
- Wearable Devices
- Portable GPS
- Smartphone and PDA
- Portable/Handheld Devices
- Hot Swap
