L9339
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TTL AND CMOS COMPATIBLE INPUTS |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9339 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3.5 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Driver Number of Bits | 4 |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Built-in Protections | TRANSIENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9339 Overview
A Tube is used to package it.The 20-SOIC (0.295, 7.50mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 4 outputs.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Status Flag features.The L9339 family consists of this type.There are 20 terminations in it.In order to operate, the 20 pins are used.Currently, there are 1 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 200mA.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 20 pins.In this LED driving board, there is 1.7Ohm resistance.In this case, the output current will be set to 200mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this case, Vsup (maximum supply voltage) is set to 32V.The LED driver can also be used to produce TTL AND CMOS COMPATIBLE INPUTS.
L9339 Features
Resistance of 1.7Ohm
Additional features like TTL AND CMOS COMPATIBLE INPUTS
L9339 Applications
There are a lot of STMicroelectronics L9339 Power Switches ICs applications.
- USB Protection
- USB Power Distribution
- Portable Devices
- Solid State Drivers
- USB Power Distribution
- Portable/Handheld Devices
- Telecom and Network Systems
- Set-top-box
- PDAs
- Low Voltage I/O System Power
