L9339MD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TTL AND CMOS COMPATIBLE INPUTS |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9339 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3.5 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Driver Number of Bits | 4 |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Built-in Protections | TRANSIENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9339MD Overview
The package is in the form of a Tube.It is included in the package 20-SOIC (0.295, 7.50mm Width).Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The lighting driver is equipped with 4 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Status Flag.It comes under the family of L9339.In total, there are 20 terminations.The 20 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 200mA to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 20 pins.The output current is set to 200mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this case, Vsup (maximum supply voltage) is set to 32V.TTL AND CMOS COMPATIBLE INPUTS can also be produced by using this LED driver.
L9339MD Features
Additional features like TTL AND CMOS COMPATIBLE INPUTS
L9339MD Applications
There are a lot of STMicroelectronics L9339MD Power Switches ICs applications.
- Hot-Swap Systems
- Wireless Modem Data Cards
- Hot Swap
- Smartphone and PDA
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- Wearable Devices
- USB3.1 Power Delivery
- Hot Swap
- Hot Swaps
