L9339MD-TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TTL AND CMOS COMPATIBLE INPUTS |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9339 |
| Pin Count | 20 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3.5 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Fault Protection | Over Temperature |
| Number of Drivers | 4 |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Drain to Source Resistance | 3.8Ohm |
| Built-in Protections | TRANSIENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
L9339MD-TR Overview
It is package in Tape & Reel (TR) case.It's included in the 20-SOIC (0.295, 7.50mm Width) package.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Status Flag features are available on the lighting driver.As you can see, it comes from the L9339 family.The termination count is 20.The operation is carried out using the 20 pins.It consists of 1 functions.Maximum output current falls to 200mA when operation criteria are met.In this case, it is mounted in the way of Surface Mount.A total of 20 pins are included in this LED driver.It has 1.7Ohm resistance.This case results in a 200mA output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this case, Vsup (maximum supply voltage) is set to 32V.With the help of this lighting driver, TTL AND CMOS COMPATIBLE INPUTS can also be produced.It has 4 drivers in the part.
L9339MD-TR Features
Resistance of 1.7Ohm
Additional features like TTL AND CMOS COMPATIBLE INPUTS
L9339MD-TR Applications
There are a lot of STMicroelectronics L9339MD-TR Power Switches ICs applications.
- HDD, SSD
- Storage Drives
- Hot Swap
- Set-Top Boxes
- Smartphone and PDA
- PC Cards
- HDD and SSD
- Portable Music Players
- USB Power Distribution
- Notebook and Tablet Computers
