L9347LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9347 |
| Pin Count | 36 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 7.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.5A 5A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.8V~18V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 µs |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Max | 18V |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9347LF Overview
It is package in Tube case.There is a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package that includes it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 4 for output.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Status Flag.It is part of the L9347 family of LED drivers.The termination count is 36.The operation is carried out using the 36 pins.It is important to note that the LED driving board has 4 functions.In this case, the LED driving board can produce only 2.5A 5AV as its maximum output.As a result, the maximum output current is reduced to 7.5A in order to meet the operation requirements.Supply voltages of 5V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 36 pins.The LED driver has 350mOhm resistance.A maximum supply voltage of 5.5V is set in Vsup.5mA is the maximum current required to operate it.
L9347LF Features
Supplied from 5V
Resistance of 350mOhm
L9347LF Applications
There are a lot of STMicroelectronics L9347LF Power Switches ICs applications.
- Gaming
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- USB Protection
- Portable Video Game Players
- USB Power Distribution
- Handheld Devices
- PDAs
- Storage Drives
- USB3.1 Power Delivery
