L9347LF-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9347 |
| Pin Count | 36 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 7.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.5A 5A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.8V~18V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 µs |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Max | 18V |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9347LF-TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package that includes it.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.The L9347 family contains this object.There are 36 terminations in it.It is necessary to use the 36 pins in order to operate the LED driver.It has 4 functions.The LED driver output is limited to 2.5A 5AV.Maximum output current falls to 7.5A when operation criteria are met.The supply voltage of 5V is conducive to high efficiency.It is mounted in the way of Surface Mount.In total, it has 36 pins.Lighting drivers with 350mOhm resistance are used.The Vsup value (maximum supply voltage) is set to 5.5V.For its operation, a maximum current requirement of 5mA is required.
L9347LF-TR Features
Supplied from 5V
Resistance of 350mOhm
L9347LF-TR Applications
There are a lot of STMicroelectronics L9347LF-TR Power Switches ICs applications.
- USB Protection
- USB Ports/Hubs
- Storage (HDDs, SSDs)
- HDD, SSD
- Hot Swaps
- Notebook PC
- Portable/Handheld Devices
- Gaming
- Smart Phones, Feature Phones
- Solid State Drivers
