L9347PD
| Parameters | |
|---|---|
| Pin Count | 36 |
| JESD-30 Code | R-PDSO-G36 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.5A 5A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.8V~18V |
| Driver Number of Bits | 4 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 µs |
| Rds On (Typ) | 200m Ω, 350m Ω |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Max | 18V |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 38 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | L9347 |
L9347PD Overview
It is packaged in the form of a Tube.It's included in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Status Flag features are available on the lighting driver.There is a L9347 family of things that it belongs to.A total of 36 terminations have been recorded.The 38 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 4.In terms of output, the lighting driver can provide a maximum of 2.5A 5A V.This operation requires the maximum output current to be decreased to 5A.High efficiency is possible when the supply voltage is set to 5V.The lighting driver is mounted in the way of Surface Mount.There are 36 pins in total on this board.350mOhm resistance is present in the lighting driver.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).There is a maximum current requirement of 5mA for its operation.
L9347PD Features
Supplied from 5V
Resistance of 350mOhm
L9347PD Applications
There are a lot of STMicroelectronics L9347PD Power Switches ICs applications.
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- HDD and SSD
- Set-top-box
- Portable Devices
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Wireless Headsets
- USB Ports/Hubs
- PDAs
