L9348
| Parameters | |
|---|---|
| Nominal Supply Current | 8mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Rise Time | 5μs |
| Fall Time (Typ) | 8 μs |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.8V~18V |
| Driver Number of Bits | 4 |
| Fault Protection | Over Temperature |
| Turn Off Time | 30 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9348 |
| Pin Count | 36 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 18V |
| Interface | On/Off |
| Current - Output (Max) | 3A 5A |
L9348 Overview
The package is in the form of a Tube.This package is included in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver is equipped with 4 outputs.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.It has a total of Status Flag features.I believe it belongs to the L9348 family.It has a total of 36 terminations.The operation is performed through the 36 pins.It consists of 4 functions.There is a maximum output of 3A 5AV from the LED driver.The maximum output current is reduced to 5A to meet the operation criteria.Surface Mount is mounted in the way.A total of 36 pins are present on it.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The maximum supply voltage for this lighting driver is set to 18V (Vsup).This system has a maximum current requirement of 8mA.
L9348 Features
L9348 Applications
There are a lot of STMicroelectronics L9348 Power Switches ICs applications.
- Wireless Headsets
- Telecom and Network Systems
- USB Ports/Hubs
- PDAs
- Solid-State Drives
- Wireless Modem Data Cards
- USB Power Distribution
- USB Power Distribution
- Portable Devices
- Handheld Devices
