Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
Number of Pins |
36 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
36 |
ECCN Code |
EAR99 |
Resistance |
350mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Technology |
BCD |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
4 |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
L9348 |
Pin Count |
36 |
Number of Outputs |
4 |
Output Type |
N-Channel |
Max Output Current |
5A |
Supply Voltage-Max (Vsup) |
18V |
Interface |
On/Off |
Current - Output (Max) |
3A 5A |
Nominal Supply Current |
8mA |
Output Configuration |
Low Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
8mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
20 μs |
Switch Type |
General Purpose |
Rise Time |
5μs |
Fall Time (Typ) |
8 μs |
Turn-Off Delay Time |
5 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.8V~18V |
Driver Number of Bits |
4 |
Fault Protection |
Over Temperature |
Turn Off Time |
30 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL |
Output Current Flow Direction |
SOURCE |
Height Seated (Max) |
3.6mm |
Length |
15.9mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
L9348-TR Overview
Tape & Reel (TR) is the way it's packaged.It's included in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 4.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Status Flag.The L9348 family consists of this type.As a result, there are 36 terminations.For operation, we use the 36 pins.Currently, the lighting driver has a total of 4 functions.The lighting driver's maximum output is 3A 5AV.The maximum output current drops to 5A in order to meet the operation criteria.Surface Mount is mounted in the way.As a result, it has a total of 36 pins.350mOhm is the resistance of the lighting driver.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The lighting driver is configured to have a maximum supply voltage of 18V (Vsup).It operates at a maximum current of 8mA.
L9348-TR Features
Resistance of 350mOhm
L9348-TR Applications
There are a lot of STMicroelectronics L9348-TR Power Switches ICs applications.
- Portable Devices
- Handheld Devices
- Hot Swap
- Hot Swap
- Notebook PC
- USB Power Distribution
- Portable GPS
- Various applications equipped with buttons
- Storage Drives
- Set-top-box