L9352B-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | L9352 |
| Pin Count | 36 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 7.5A |
| Supply Voltage-Max (Vsup) | 18V |
| Interface | Parallel |
| Current - Output (Max) | 2.5A 5A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.8V~18V |
| Driver Number of Bits | 4 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 20 µs |
| Rds On (Typ) | 200m Ω |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9352B-LF Overview
Tube is how it's packaged.There is a package for it in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.It uses a supply voltage of 4.5V~5.5V to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It has a total of Status Flag features.As you can see, it comes from the L9352 family.A total of 36 terminations have been found in it.In order to operate, the 36 pins are used.It has 1 functions.2.5A 5AV is the maximum output of the LED driver.It is necessary to reduce the maximum output current to 7.5A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 36 pins.It has 200mOhm resistance.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The lighting driver is configured to have a maximum supply voltage of 18V (Vsup).There is a maximum current requirement of 5mA for its operation.
L9352B-LF Features
Supplied from 5V
Resistance of 200mOhm
L9352B-LF Applications
There are a lot of STMicroelectronics L9352B-LF Power Switches ICs applications.
- Low Voltage I/O System Power
- Hot Swaps
- HDD and SSD
- Storage (HDDs, SSDs)
- Notebook PC
- Gaming
- USB Power Distribution
- Wearable Devices
- USB Ports/Hubs
- Portable Music Players
