banner_page

L9352B-TR-LF

N-Channel 0.65mm PMIC L9352 36 Pin 5V 36-BSSOP (0.433, 11.00mm Width) Exposed Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-L9352B-TR-LF
  • Package: 36-BSSOP (0.433, 11.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 937
  • Description: N-Channel 0.65mm PMIC L9352 36 Pin 5V 36-BSSOP (0.433, 11.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 36-BSSOP (0.433, 11.00mm Width) Exposed Pad
Number of Pins 36
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e3
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 36
ECCN Code EAR99
Resistance 200mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number L9352
Pin Count 36
Number of Outputs 4
Output Type N-Channel
Max Output Current 7.5A
Supply Voltage-Max (Vsup) 18V
Interface Parallel
Current - Output (Max) 2.5A 5A
Output Configuration Low Side
Voltage - Supply (Vcc/Vdd) 4.5V~5.5V
Max Supply Current 5mA
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 5A
Ratio - Input:Output 1:1
Voltage - Load 4.8V~18V
Driver Number of Bits 4
Fault Protection Open Load Detect, Over Temperature
Turn On Time 20 µs
Rds On (Typ) 200m Ω
Turn Off Time 30 µs
Built-in Protections TRANSIENT
Output Current Flow Direction SOURCE
Height Seated (Max) 3.6mm
Length 15.9mm
Width 11mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

L9352B-TR-LF Overview


It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package as well.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.A voltage of 4.5V~5.5V is used to power it.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.As you can see, it comes from the L9352 family.A total of 36 terminations have been recorded.The operation is carried out using the 36 pins.Currently, the lighting driver has a total of 1 functions.The maximum output of the LED driving board is 2.5A 5AV.To meet the operation criteria, the maximum output current drops to 7.5A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way of this LED driving board.A total of 36 pins are present on it.Lighting drivers with 200mOhm resistance are used.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this LED driver, the maximum supply voltage is configured to be 18V (Vsup).It operates at a maximum current of 5mA.

L9352B-TR-LF Features


Supplied from 5V
Resistance of 200mOhm

L9352B-TR-LF Applications


There are a lot of STMicroelectronics L9352B-TR-LF Power Switches ICs applications.

  • Set-Top Boxes
  • Gaming
  • Solid-State Drives
  • Hard Disk Drives
  • Portable Music Players
  • Storage (HDDs, SSDs)
  • Telecom and Network Systems
  • Storage Drives
  • Portable Devices
  • Smartphone and PDA

Write a review

Note: HTML is not translated!
    Bad           Good