L9362
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-36 Exposed Bottom Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9362 |
| Pin Count | 36 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | SPI |
| Nominal Supply Current | 11mA |
| Output Configuration | Low Side |
| Max Supply Current | 80mA |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 100 ns |
| Switch Type | General Purpose |
| Output Current per Channel | 3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Driver Number of Bits | 4 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 250m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9362 Overview
Tube is the way it's packaged.The PowerSO-36 Exposed Bottom Pad package contains it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.It has a maximum output voltage of N-Channel volts.The L9362 family consists of this type.A total of 36 terminations have been found in it.It is necessary to use the 36 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 5A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 36 pins.Lighting drivers with 250mOhm resistance are used.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this case, Vsup (maximum supply voltage) is set to 5.5V.In this part, the power supply is set to 5V.It has a maximum current requirement of 80mA.
L9362 Features
Supplied from 5V
Resistance of 250mOhm
L9362 Applications
There are a lot of STMicroelectronics L9362 Power Switches ICs applications.
- Wireless/Networking Cards
- Telecom and Network Systems
- USB Power Distribution
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- USB Power Distribution
- Set-Top Boxes
- PC Cards
- Solid State Drivers
- Hot Swap
