L9386MD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9386 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Operating Supply Voltage | 45V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 45V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Driver Number of Bits | 2 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 200m Ω |
| Drain to Source Resistance | 500mOhm |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9386MD Overview
The package is in the form of a Tube.The 20-SOIC (0.295, 7.50mm Width) package includes it.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.The L9386 family consists of this type.It has a total of 20 terminations.In order to operate, 20 pins are used.It consists of 2 functions.To meet the operation criteria, the maximum output current drops to 7A.It is possible to achieve a high level of efficiency with a supply voltage of 12V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 20 pins.200mOhm resistance is present in the lighting driver.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.It is recommended that the supply voltage be set at 45V in order to achieve maximum efficiency.This LED driving board can accept voltages up to 45V volts as an input.A minimum input voltage of 4.5V volts is required for this LED driver.It requires a maximum current requirement of 15mA.
L9386MD Features
Supplied from 12V
Resistance of 200mOhm
L9386MD Applications
There are a lot of STMicroelectronics L9386MD Power Switches ICs applications.
- Portable Video Game Players
- Telecom and Network Systems
- Solid-State Drives
- Portable/Handheld Devices
- Solid State Drivers
- HDD, SSD
- Various applications equipped with buttons
- USB3.1 Power Delivery
- USB Ports/Hubs
- PDAs
