L9386MD-TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | L9386 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Operating Supply Voltage | 45V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 45V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Driver Number of Bits | 2 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 200m Ω |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9386MD-TR Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the 20-SOIC (0.295, 7.50mm Width) package.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Slew Rate Controlled features.It belongs to the family L9386.It contains 20 terminations.It is necessary to use the 20 pins in order to operate the LED driver.Currently, there are 2 functions associated with the lighting driver.The supply voltage of 12V is conducive to high efficiency.Surface Mount is mounted in the way.20 pins are connected to it in total.The LED driver has 500mOhm resistance.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.Optimal efficiency requires a voltage of 45V.This LED driving board can accept voltages up to 45V volts as an input.The input voltage minimum is 4.5V volts.A maximum current requirement of 15mA is required for its operation.
L9386MD-TR Features
Supplied from 12V
Resistance of 500mOhm
L9386MD-TR Applications
There are a lot of STMicroelectronics L9386MD-TR Power Switches ICs applications.
- Solid State Drivers
- Solid-State Drives
- Mobile Communication Devices
- Portable Video Game Players
- Wireless Modem Data Cards
- Wireless/Networking Cards
- USB3.1 Power Delivery
- Hot-Swap Systems
- HDD and SSD
- Portable Music Players
