L93PI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L93 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 15mA |
| Interface | On/Off |
| Current - Output (Max) | 400mA |
| Output Configuration | Low Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.5 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~40V |
| Driver Number of Bits | 4 |
| Fault Protection | Over Temperature, Reverse Current |
| Turn On Time | 3.5 µs |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L93PI Overview
As a result, it is packaged in the form of a Tube.It is included in the package 20-SOIC (0.295, 7.50mm Width).This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The L93 family consists of this type.A total of 20 terminations have been recorded.For operation, 20 pins are used.It is important to note that the LED driving board has 4 functions.In this case, the LED driving board can produce only 400mAV as its maximum output.To meet the operation criteria, the maximum output current drops to 15mA.Using a voltage of 14V allows for high efficiency.Surface Mount is mounted in the way.It is equipped with a total of 20 pins.As a result, the output current is set to 15mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.
L93PI Features
Supplied from 14V
L93PI Applications
There are a lot of STMicroelectronics L93PI Power Switches ICs applications.
- Portable/Handheld Devices
- Set-Top Boxes
- Hot Swaps
- Wireless/Networking Cards
- Set-top-box
- Portable Music Players
- Solid State Drivers
- Portable GPS Device
- USB Protection
- Portable Devices
