L9639
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9639 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 17V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 200μA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 5A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 0.2mA |
| Voltage - Load | 8V~17V |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
L9639 Overview
The package contains [0].There is 20-SOIC (0.433, 11.00mm Width) Exposed Pad case included with the part.A mounting position of Surface Mountis recommended for the part.This component is suitable for the component connected to General Purpose.A device with a voltage range of 8V~17V volts is available.Regarding the operating temperature, it is in the range of -40°C~125°C TA°C.A motor of this type can be categorized as Brushed DC.The part supports 20terminations.Voltage can be applied at a rate of 8V~17V volts to the load.I would like to remind you that this amplifier should be operated at 12V.The recommended mounting method is Surface Mount.Drivers controllers is recommended to keep the part output current at 5A.A ANALOG CIRCUITanalog integrated circuit is employed in this device.The part number L9639indicates that it is found.20 pins are provided for its design.This is part of the Motion Control Electronics series.A supply voltage of 17Vis required to operate this driver.
L9639 Features
Applications : General Purpose
Load voltage across the chip 8V~17V
base on L9639 number
L9639 Applications
There are a lot of STMicroelectronics L9639 motor drivers applications.
- Turn signals
- PDAs
- Architectural lighting
- Scanning equipment
- CHMSL (center high-mount stop lamps)
- parking lights
- drivers for outdoor application
- Tail lights
- Monitoring the energy that the luminaire uses
- PWM generators
