L9651-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9651 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Operating Supply Voltage | 30V |
| Supply Voltage-Max (Vsup) | 25V |
| Power Supplies | 6.5/25V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.7V |
| Max Input Voltage | 30V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~30V |
| Driver Number of Bits | 4 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 500m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9651-TR Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.This object belongs to the L9651 family.There are 20 terminations in it.For operation, 20 pins are used.As far as the lighting driver is concerned, there are 1 functions.This lighting driver is capable of delivering a maximum output of 2A volts.The maximum output current drops to 2.5A in order to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.A total of 20 pins are present on it.Currently, the LED driving board has 500mOhm resistance.It is set to 2.5A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage is set to 25V.6.5/25V is the power supply of the part.Optimal efficiency requires a voltage of 30V.Its maximum input voltage is 30V volts.There is a minimum input voltage of 4.7V volts.The maximum current required for its operation is 15mA.
L9651-TR Features
Resistance of 500mOhm
L9651-TR Applications
There are a lot of STMicroelectronics L9651-TR Power Switches ICs applications.
- Set-top-box
- USB Protection
- Portable GPS
- Smartphone and PDA
- Portable Devices
- Mobile Communication Devices
- Hot-Swap Systems
- PDAs
- PC Cards
- PC Card Hot Swap
