L9733CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | PWM Input |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L9733 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 800mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | SPI |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Max Supply Current | 8.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Rise Time | 70ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~18V |
| Driver Number of Bits | 8 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 700m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.45mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
L9733CN Overview
As you can see, it's packaged in the way of a Tube.This package is included in 28-SSOP (0.295, 7.50mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.By default, it is set to output 8.To operate, it needs a supply voltage of 4.5V~5.5V.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has PWM Input.The L9733 family consists of this type.It contains 28 terminations.During operation, the 28 pins are used.Currently, there are 1 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 800mA.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Surface Mount.28 pins are connected to it in total.Lighting drivers with 700mOhm resistance are used.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part's power supply is 5V.In order to maximize efficiency, the supply voltage should be set at 5V.A maximum current requirement of 8.5mA is required for its operation.
L9733CN Features
Supplied from 5V
Resistance of 700mOhm
L9733CN Applications
There are a lot of STMicroelectronics L9733CN Power Switches ICs applications.
- Notebook PC
- Hot-Swap Systems
- USB Ports/Hubs
- Notebook and Tablet Computers
- Set-Top Boxes
- Storage Drives
- USB3.1 Power Delivery
- Handheld Devices
- Portable Video Game Players
- USB Protection
