banner_page

L9733CNTR

5V N-Channel 0.65mm PMIC L9733 28 Pin 5V 28-SSOP (0.295, 7.50mm Width) Exposed Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-L9733CNTR
  • Package: 28-SSOP (0.295, 7.50mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 763
  • Description: 5V N-Channel 0.65mm PMIC L9733 28 Pin 5V 28-SSOP (0.295, 7.50mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SSOP (0.295, 7.50mm Width) Exposed Pad
Number of Pins 28
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Feature PWM Input
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
ECCN Code EAR99
Resistance 700mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number L9733
Pin Count 28
Number of Outputs 8
Output Type N-Channel
Max Output Current 800mA
Operating Supply Voltage 5V
Power Supplies 5V
Interface SPI
Output Configuration High Side or Low Side
Voltage - Supply (Vcc/Vdd) 4.5V~5.5V
Max Supply Current 8.5mA
Input Type Non-Inverting
Turn On Delay Time 20 μs
Switch Type General Purpose
Output Current per Channel 1A
Rise Time 70ns
Fall Time (Typ) 70 ns
Turn-Off Delay Time 100 μs
Ratio - Input:Output 1:8
Voltage - Load 4.5V~18V
Driver Number of Bits 8
Fault Protection Open Load Detect, Over Temperature
Output Peak Current Limit-Nom 1A
Rds On (Typ) 700m Ω (Max)
Built-in Protections OVER CURRENT; THERMAL
Output Current Flow Direction SOURCE
Height Seated (Max) 2.45mm
Length 10.3mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

L9733CNTR Overview


Tape & Reel (TR) is how it's packaged.It is included with the 28-SSOP (0.295, 7.50mm Width) Exposed Pad package as well.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.The temperature should be set to -40°C~125°C TA to ensure reliable functioning.There are 8 outputs available on this lighting driver.Operation is based on a supply voltage of 4.5V~5.5V.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with PWM Input features.It is part of the L9733 family of LED drivers.It contains 28 terminations.The 28 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 800mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.It is positioned in the direction of Surface Mount.28 pins are equipped with it.It has 700mOhm resistance.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.There is a voltage supply of 5V volts on this part.In order to maximize efficiency, the supply voltage should be set at 5V.8.5mA is the maximum current required to operate it.

L9733CNTR Features


Supplied from 5V
Resistance of 700mOhm

L9733CNTR Applications


There are a lot of STMicroelectronics L9733CNTR Power Switches ICs applications.

  • USB3.1 Power Delivery
  • Portable Music Players
  • Low Voltage I/O System Power
  • USB Protection
  • HDD and SSD
  • Portable Devices
  • USB Power Distribution
  • Telecom and Network Systems
  • PC Card Hot Swap
  • Wireless/Networking Cards

Write a review

Note: HTML is not translated!
    Bad           Good