L9733XP
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Feature | PWM Input |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | L9733 |
| Pin Count | 28 |
| Output Type | N-Channel |
| Max Output Current | 800mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | SPI |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Max Supply Current | 8.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Rise Time | 70ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~18V |
| Fault Protection | Open Load Detect, Over Temperature |
| Number of Drivers | 8 |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 700m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.45mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9733XP Overview
It is packaged in the manner of a Tube.It's included in the 28-SSOP (0.295, 7.50mm Width) Exposed Pad package.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~125°C TA to ensure reliable functioning.The LED driving board operates at 4.5V~5.5V volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.PWM Input features are available on the lighting driver.The L9733 family contains this object.As a result, there are 28 terminations.28 pins are used for operation.Currently, there are 1 functions associated with the lighting driver.In order to meet the operation criteria, the maximum output current drops to 800mA.With a supply voltage of 5V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.A total of 28 pins are included in this LED driver.700mOhm resistance is present in the lighting driver.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This part's power supply is 5V.It is recommended to set the supply voltage to 5V for optimum efficiency.For its operation, a current of 8.5mA is required.It has 8 drivers.
L9733XP Features
Supplied from 5V
Resistance of 700mOhm
L9733XP Applications
There are a lot of STMicroelectronics L9733XP Power Switches ICs applications.
- Hot-Swap Systems
- Portable Devices
- HDD and SSD
- Wireless Headsets
- PC Card Hot Swap
- USB Power Distribution
- Smart Phones, Feature Phones
- Telecom and Network Systems
- Low Voltage I/O System Power
- Handheld Devices
