L9733XPTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | PWM Input |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9733 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 800mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | SPI |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Max Supply Current | 8.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Rise Time | 70ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~18V |
| Driver Number of Bits | 8 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 700m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.45mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9733XPTR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 28-SSOP (0.295, 7.50mm Width) Exposed Pad package that includes it.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TA.The LED driver has 8 outputs.The LED driving board is powered by a voltage of 4.5V~5.5V.It has a maximum output voltage of N-Channel volts.There are PWM Input features available on the LED driving board.It comes under the family of L9733.As a result, there are 28 terminations.It is necessary to use the 28 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 800mA in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 5V.Surface Mount is mounted in the way.A total of 28 pins are included in this LED driver.Lighting drivers with 700mOhm resistance are used.It is self-contained in an econtainer with a capacity of Peripheral Drivers.A 5V power supply is used by the part.When using this LED driving board, it is recommended that the supply voltage is set to 5V.It operates at a maximum current of 8.5mA.
L9733XPTR Features
Supplied from 5V
Resistance of 700mOhm
L9733XPTR Applications
There are a lot of STMicroelectronics L9733XPTR Power Switches ICs applications.
- Handheld Devices
- Gaming
- Solid-State Drives
- Wireless Modem Data Cards
- Wireless Headsets
- Portable Music Players
- HDD, SSD
- PC Card Hot Swap
- Portable GPS Device
- Smartphone and PDA
