L9822E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | Multiwatt-15 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 15 |
| Manufacturer Package Identifier | Multiwatt15-0016036 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Resistance | 550mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9822 |
| Pin Count | 15 |
| Qualification Status | Not Qualified |
| Output Voltage | 40V |
| Max Output Current | 1.05A |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Output Current | 1.05A |
| Turn On Delay Time | 10 μs |
| Switch Type | Relay, Solenoid Driver |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed) |
| Number of Drivers | 8 |
| Output Peak Current Limit-Nom | 1.05A |
| Rds On (Typ) | 550m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 1Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 21mm |
| Width | 17.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount, Through Hole |
L9822E Overview
The LED driver's packaged as a Tube.It is included in the package Multiwatt-15 (Vertical, Bent and Staggered Leads).Through Hole is the mounting type of the LED driver.There is a Relay, Solenoid Driver switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It has a total of Status Flag features.There is a L9822 family of things that it belongs to.It has a total of 15 terminations.The operation is carried out using the 15 pins.There are 1 functions of the LED driver.The maximum output current must drop to 1.05A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.It is positioned in the direction of Surface Mount, Through Hole.15 pins are equipped with it.It has a resistance of 550mOhm.This case has the output current set to 1.05A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this case, the power supply is 5V.The supply voltage should be set at 5.25V for best efficiency.The greatest supply voltage it can handle is 5.25VV.Supply voltages as low as 4.75VV are possible.A total of 8 drivers are included in this part.
L9822E Features
Supplied from 5V
Resistance of 550mOhm
L9822E Applications
There are a lot of STMicroelectronics L9822E Power Switches ICs applications.
- Set-top-box
- Storage (HDDs, SSDs)
- Notebook PC
- Wireless Modem Data Cards
- Handheld Devices
- PC Cards
- USB Power Distribution
- Storage Drives
- Portable Music Players
- Mobile Communication Devices
