L9822EPD
| Parameters | |
|---|---|
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 550mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9822 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Max Output Current | 1.05A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | SPI |
| Max Supply Voltage | 7V |
| Min Supply Voltage | -700mV |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Output Current | 1A |
| Turn On Delay Time | 10 μs |
| Switch Type | Relay, Solenoid Driver |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Output Peak Current Limit-Nom | 1.05A |
| Rds On (Typ) | 550m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
L9822EPD Overview
As you can see, it's packaged in the way of a Tube.There is a package for it in the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.It owns Relay, Solenoid Driver switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 8 outputs.There are Status Flag features available on the LED driving board.It comes under the family of L9822.It has a total of 20 terminations.The 20 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 1.05A in order to meet the operation requirements.Supply voltages of 5V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.In total, it has 20 pins.The LED driver has 550mOhm resistance.It is set to 1A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In total, 2 channels are available.This part is powered by 5V.In order to optimize the efficiency of the supply voltage, it should be set to 5V.There is a maximum voltage of 7VV that it can handle.Supply voltages as low as -700mVV are possible.
L9822EPD Features
Supplied from 5V
Resistance of 550mOhm
2 channels
L9822EPD Applications
There are a lot of STMicroelectronics L9822EPD Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- PC Card Hot Swap
- Solid-State Drives
- Portable/Handheld Devices
- Set-top-box
- Handheld Devices
- USB Power Distribution
- Portable Video Game Players
- Smartphone and PDA
