L9822EPD013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 550mOhm |
| Terminal Finish | Tin (Sn) |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9822 |
| Pin Count | 20 |
| Output Voltage | 40V |
| Max Output Current | 1.05A |
| Operating Supply Voltage | 5.25V |
| Interface | SPI |
| Max Supply Voltage | 7V |
| Min Supply Voltage | -700mV |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Output Current | 1.05A |
| Turn On Delay Time | 10 μs |
| Switch Type | Relay, Solenoid Driver |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed) |
| Number of Drivers | 8 |
| Output Peak Current Limit-Nom | 1.05A |
| Rds On (Typ) | 550m Ω |
| Drain to Source Resistance | 1Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L9822EPD013TR Overview
As a result, it is packaged in the form of a Cut Tape (CT).It is included in the package 20-SOIC (0.433, 11.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.Relay, Solenoid Driver is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It has a total of Status Flag features.I believe it belongs to the L9822 family.A total of 20 terminations have been recorded.It is necessary to use the 20 pins in order to operate the LED driver.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.05A.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the way of Surface Mount.There are 20 pins in total on this board.It has 550mOhm resistance.In this case, the output current is set to 1.05A.In order to optimize the efficiency of the supply voltage, it should be set to 5.25V.In addition to 7VV, it can handle other voltages as well.It is also capable of running at -700mV volts if necessary.It has 8 drivers in the part.
L9822EPD013TR Features
Supplied from 5V
Resistance of 550mOhm
L9822EPD013TR Applications
There are a lot of STMicroelectronics L9822EPD013TR Power Switches ICs applications.
- USB Protection
- Hot Swap
- Telecom and Network Systems
- Portable GPS
- Mobile Communication Devices
- Wireless/Networking Cards
- PC Cards
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Hot Swap
