L9822N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 22 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 530mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9822 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.25V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | SPI |
| Output Configuration | Low Side |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Driver Number of Bits | 8 |
| Turn On Time | 10 μs |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9822N Overview
It is package in Tube case.It is included in the package 20-SOIC (0.295, 7.50mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 8 outputs.There are Status Flag features available on the LED driving board.It belongs to the L9822 family.A total of 20 terminations can be found in it.For operation, we use the 22 pins.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.A supply voltage of 5V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 20 pins.The LED driver has 530mOhm resistance.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.Vsup (maximum supply voltage) is set to 5.5V.This part is powered by 5V.In order to maximize efficiency, the supply voltage should be set at 5.25V.
L9822N Features
Supplied from 5V
Resistance of 530mOhm
L9822N Applications
There are a lot of STMicroelectronics L9822N Power Switches ICs applications.
- Portable GPS Device
- Solid-State Drives
- USB3.1 Power Delivery
- Various applications equipped with buttons
- Solid State Drivers
- Notebook PC
- Portable/Handheld Devices
- USB Protection
- Smart Phones, Feature Phones
- Portable Devices
