banner_page

L9825

5V N-Channel 1.27mm PMIC L9825 20 Pin 5V 20-SOIC (0.433, 11.00mm Width) Exposed Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-L9825
  • Package: 20-SOIC (0.433, 11.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 391
  • Description: 5V N-Channel 1.27mm PMIC L9825 20 Pin 5V 20-SOIC (0.433, 11.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Width 11mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 8 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.433, 11.00mm Width) Exposed Pad
Number of Pins 20
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e3
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
ECCN Code EAR99
Resistance 750mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 8
Supply Voltage 5V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number L9825
Pin Count 20
Number of Outputs 8
Output Type N-Channel
Max Output Current 1.4A
Operating Supply Voltage 5.5V
Power Supplies 5V
Interface SPI
Nominal Supply Current 5mA
Output Configuration Low Side
Output Current 1A
Voltage - Supply (Vcc/Vdd) 4.5V~5.5V
Max Supply Current 2.05A
Propagation Delay 100 ns
Turn On Delay Time 100 ns
Switch Type Latched Driver
Min Input Voltage 4.5V
Max Input Voltage 5.5V
Ratio - Input:Output 1:8
Voltage - Load 45V Max
Driver Number of Bits 8
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 10 µs
Output Peak Current Limit-Nom 1.4A
Rds On (Typ) 750m Ω (Max)
Turn Off Time 10 µs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Height Seated (Max) 3.6mm
Length 15.9mm

L9825 Overview


Tube is the way it's packaged.The 20-SOIC (0.433, 11.00mm Width) Exposed Pad package contains it.The lighting driver has the mounting type Surface Mount.Latched Driver is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.By default, it is set to output 8.Operation is based on a supply voltage of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Status Flag.It belongs to the family L9825.A total of 20 terminations have been found in it.In order to operate, 20 pins are used.Currently, there are 8 functions associated with the lighting driver.The maximum output current is reduced to 1.4A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.In this case, it is mounted in the way of Surface Mount.A total of 20 pins are present on it.In this LED driving board, there is 750mOhm resistance.This case has the output current set to 1A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.5V is the power supply of the part.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.The maximum input voltage is 5.5V volts.A voltage of 4.5V volts is the minimum input voltage.2.05A is the maximum current required to operate it.

L9825 Features


Supplied from 5V
Resistance of 750mOhm

L9825 Applications


There are a lot of STMicroelectronics L9825 Power Switches ICs applications.

  • Notebook and Tablet Computers
  • HDD and SSD
  • Solid-State Drives
  • Notebook PC
  • Smart Phones, Feature Phones
  • Smartphone and PDA
  • Portable/Handheld Devices
  • Mobile Communication Devices
  • USB Power Distribution
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good