L9825TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 750mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9825 |
| Pin Count | 20 |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | SPI |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 100 ns |
| Switch Type | Latched Driver |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 45V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Number of Drivers | 8 |
| Turn On Time | 10 μs |
| Output Peak Current Limit-Nom | 1.4A |
| Rds On (Typ) | 750m Ω (Max) |
| Drain to Source Resistance | 1.5Ohm |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L9825TR Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package as well.The lighting driver has the mounting type Surface Mount.Latched Driver is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driving board operates with a supply voltage of 4.5V~5.5V.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the L9825 family.It contains 20 terminations.The 20 pins are used for the operation of the system.The LED driver has 8 functions.The lighting driver's maximum output is 1AV.The maximum output current drops to 1.4A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 20 pins.750mOhm resistance is present in the lighting driver.When this case is used, the output current is set to 1.75A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The power supply of the part is 5V.In order to maximize efficiency, the supply voltage should be set at 5V.The part has 8 drivers.
L9825TR Features
Supplied from 5V
Resistance of 750mOhm
L9825TR Applications
There are a lot of STMicroelectronics L9825TR Power Switches ICs applications.
- Hard Disk Drives
- HDD, SSD
- Wireless/Networking Cards
- Set-top-box
- Telecom and Network Systems
- HDD and SSD
- Gaming
- Portable GPS
- USB Protection
- PDAs
