L9826
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9826 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 450mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Max Supply Current | 5mA |
| Turn On Delay Time | 10 μs |
| Switch Type | Latched Driver |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 45V Max |
| Driver Number of Bits | 8 |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 1.5 Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9826 Overview
It's?packaged?in?the way?of?a?Tube.It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.The lighting driver is mounted in the Surface Mount position.It owns Latched Driver switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 8.The LED driving board operates with a supply voltage of 4.5V~5.5V.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the family L9826.A total of 20 terminations have been found in it.20 pins are used for operation.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 450mA to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.A total of 20 pins are present on it.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.This part has a power supply of 5V.For its operation, a maximum current requirement of 5mA is required.
L9826 Features
Supplied from 5V
L9826 Applications
There are a lot of STMicroelectronics L9826 Power Switches ICs applications.
- Telecom and Network Systems
- USB Power Distribution
- Portable Music Players
- Set-Top Boxes
- Portable Devices
- Notebook and Tablet Computers
- Set-top-box
- PDAs
- Handheld Devices
- Notebook PC
