L9826TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.5Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 3MHz |
| Base Part Number | L9826 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | SPI |
| Current - Output (Max) | 450mA |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Max Supply Current | 5mA |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 10 μs |
| Switch Type | Latched Driver |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 45V Max |
| Driver Number of Bits | 8 |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 1.5 Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9826TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 20-SOIC (0.295, 7.50mm Width) package, it is included.Surface Mount is the mounting type of the LED driver.Latched Driver is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 8.In order to operate, it requires a voltage supply of 4.5V~5.5V.It has a maximum output voltage of N-Channel volts.It belongs to the L9826 family.It contains 20 terminations.The 20 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.There is a maximum output of 450mAV from the LED driver.This operation requires the maximum output current to be decreased to 1A.The supply voltage of 5V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.There are 20 pins in total on this board.In this LED driving board, there is 1.5Ohm resistance.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.5V is the power supply of the part.When using this LED driving board, it is recommended that the supply voltage is set to 5V.The maximum current required for its operation is 5mA.
L9826TR Features
Supplied from 5V
Resistance of 1.5Ohm
L9826TR Applications
There are a lot of STMicroelectronics L9826TR Power Switches ICs applications.
- USB Protection
- Telecom and Network Systems
- Portable GPS
- Hot Swap
- PDAs
- Wireless/Networking Cards
- Mobile Communication Devices
- Handheld Devices
- Notebook PC
- Hot Swaps
