Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
PWM Input |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
1.5Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
L9848 |
Pin Count |
28 |
Number of Outputs |
8 |
Max Output Current |
350mA |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Interface |
SPI |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Nominal Supply Current |
6mA |
Output Configuration |
High Side or Low Side |
Max Supply Current |
6mA |
Turn On Delay Time |
20 μs |
Switch Type |
General Purpose |
Output Current per Channel |
800mA |
Rise Time |
30ns |
Fall Time (Typ) |
30 ns |
Turn-Off Delay Time |
100 μs |
Ratio - Input:Output |
1:8 |
Voltage - Load |
4.75V~5.25V |
Driver Number of Bits |
8 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature |
Rds On (Typ) |
1.5 Ω (Max) |
Built-in Protections |
THERMAL |
Output Current Flow Direction |
SOURCE SINK |
Height Seated (Max) |
2.65mm |
Length |
17.9mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
L9848 Overview
A Tube is used to package it.It is included in the package 28-SOIC (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.There are PWM Input features available on the LED driving board.This object belongs to the L9848 family.It contains 28 terminations.28 pins are used for operation.It contains 1 functions.As a result, the maximum output current is reduced to 350mA in order to meet the operation requirements.Supply voltages of 5V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.28 pins are equipped with it.It has 1.5Ohm resistance.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The power supply of the part is 5V.It is recommended to set the supply voltage to 5V for optimum efficiency.It operates at a maximum current of 6mA.It can handle a voltage of 5.25VV as its maximum supply voltage.It can operate at 4.75V volts as well.
L9848 Features
Supplied from 5V
Resistance of 1.5Ohm
L9848 Applications
There are a lot of STMicroelectronics L9848 Power Switches ICs applications.
- Portable Devices
- Set-Top Boxes
- Solid State Drivers
- Wearable Devices
- Portable GPS Device
- Wireless Headsets
- Solid-State Drives
- USB Protection
- Smartphone and PDA
- Portable GPS