L9848TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | PWM Input |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9848 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Max Output Current | 350mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side or Low Side |
| Max Supply Current | 6mA |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 800mA |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.75V~5.25V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 1.5 Ω (Max) |
| Built-in Protections | THERMAL |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9848TR Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 28-SOIC (0.295, 7.50mm Width).A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.In this LED driver, there are no outputs available.This LED driving board is equipped with PWM Input features in order for it to be useful.It belongs to the family L9848.A total of 28 terminations have been recorded.In order to operate, the 28 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 350mA.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 28 pins.In this case, there is 1.5Ohm resistance in the LED driving board.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It has a power supply of 5V.A supply voltage of 5V is recommended for maximum efficiency.It operates at a maximum current of 6mA.A maximum supply voltage of 5.25VV can be handled by the LED driving board.You can also run it at 4.75V volts if required.
L9848TR Features
Supplied from 5V
Resistance of 1.5Ohm
L9848TR Applications
There are a lot of STMicroelectronics L9848TR Power Switches ICs applications.
- Smartphone and PDA
- Portable Video Game Players
- Portable Music Players
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Portable/Handheld Devices
- Wearable Devices
- USB Power Distribution
- Smart Phones, Feature Phones
- Various applications equipped with buttons
