L98SI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L98 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Max Output Current | 750mA |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | SPI |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Driver Number of Bits | 8 |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 1.05A |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L98SI Overview
As a result, it is packaged in the form of a Tube.In the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package, it is included.The lighting driver has the mounting type Surface Mount.It owns Relay, Solenoid Driver switch type.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 8 outputs in the lighting driver.The L98 family consists of this type.The termination count is 20.It is necessary to use the 20 pins in order to operate the LED driver.Currently, the lighting driver has a total of 8 functions.This operation requires the maximum output current to be decreased to 750mA.The supply voltage of 5V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 20 pins.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The Vsup value (maximum supply voltage) is set to 5.25V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.75V.A 5V power supply is used by the part.
L98SI Features
Supplied from 5V
L98SI Applications
There are a lot of STMicroelectronics L98SI Power Switches ICs applications.
- Hot Swaps
- Telecom and Network Systems
- Portable GPS Device
- Mobile Communication Devices
- Notebook and Tablet Computers
- PC Card Hot Swap
- USB Power Distribution
- Low Voltage I/O System Power
- Portable Video Game Players
- Portable GPS
