L9997ND013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Automotive |
| Technology | CMOS, DMOS |
| Voltage - Supply | 7V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9997 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Max Output Current | 1.6A |
| Operating Supply Voltage | 14.4V |
| Interface | Parallel |
| Nominal Supply Current | 6mA |
| Output Configuration | Half Bridge (2) |
| Max Supply Current | 6mA |
| Turn On Delay Time | 150 μs |
| Rise Time | 150μs |
| Fall Time (Typ) | 150 μs |
| Turn-Off Delay Time | 100 μs |
| Collector Emitter Voltage (VCEO) | 16.5V |
| Max Collector Current | 1.2A |
| Voltage - Load | 7V~16.5V |
| Output Peak Current Limit-Nom | 1.2A |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL |
| Motor Type | Brushed |
| Output Current Flow Direction | SOURCE SINK |
| Motor Type - AC, DC | Brushed DC |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L9997ND013TR Overview
Drivers controllers is designed wDrivers controllersh a package of [0].This part is packaged with a case of [0].The part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to Automotive.This device is capable of supplying voltages up to 7V~16.5V volts.Operation temperature ranges from -40°C~150°C TJ.This motor type can be categorized as Brushed DC.In this part, there are 20 terminations available.The voltage can applied to the load at the rate of 7V~16.5V.Its recommended mounting way is Surface Mount.The L9997part number allows us to locate it.20pins are used in its design.A total of 2outputs are available.The driver operates on a supply voltage of 14.4V volts.The motor type can be identified as Brushed.In order to meet operation requirements, its maximum output current reaches [0].
L9997ND013TR Features
Applications : Automotive
Load voltage across the chip 7V~16.5V
base on L9997 number
designed with 2 outputs
Motor Type classified as Brushed
L9997ND013TR Applications
There are a lot of STMicroelectronics L9997ND013TR motor drivers applications.
- Digital still cameras
- LCD displays
- Lighting for the ambience of tunability
- Hospitality buildings
- Horticultural applications
- Automotive exterior and interior lighting
- Architectural lighting
- Telltale lights
- RGB and monochromatic LED drivers for signage and traffic signals
- Indicator
