LA4032V-75TN44E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | LA-ispMACH |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 168MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LA4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Screening Level | AEC-Q100 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LA4032V-75TN44E Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 44-TQFP package.The device is programmed with 30 I/O ports.There are 44 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.The power source is powered by 3.3Vvolts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the LA-ispMACH series.It is programmed with 44 pins.When using this device, YESis also available.The LA4032indicates that its related parts can be found.For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.44pins are included in its design.It operates at a maximum supply voltage of 3.6V volts.With a minimal supply voltage of [0], it operates.There is 168MHz frequency that can be achieved.The logic block consists of 2 l logic blocks (LABs).
LA4032V-75TN44E Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~125°C TA
44 pin count
44 pins
2 logic blocks (LABs)
LA4032V-75TN44E Applications
There are a lot of Lattice Semiconductor Corporation LA4032V-75TN44E CPLDs applications.
- TIMERS/COUNTERS
- DMA control
- D/T registers and latches
- Address decoders
- Power automation
- LED Lighting systems
- Dedicated input registers
- Auxiliary Power Supply Isolated and Non-isolated
- Complex programmable logic devices
- Timing control
