LA4064V-75TN44E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | LA-ispMACH |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 168MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LA4064 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Screening Level | AEC-Q100 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LA4064V-75TN44E Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).44-TQFPis the package in which it resides.It is equipped with 30I/O ports.The termination of a device is set to [0].This electrical component has a terminal position of 0.Power is supplied by a voltage of 3.3V volts.It is a part of the family [0].It is recommended to package the chip by Tray.Ensure its reliability by operating at [0].The chip should be mounted by Surface Mount.As part of the LA-ispMACHseries, it is a type of FPGA.With 44pins programmed, the chip is ready to use.When using this device, YEScan also be found.The LA4064shows its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.This device is mounted by Surface Mount.There are 44pins on it.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 3Vis required.There is a maximum frequency of 168MHz.It consists of 4 logic blocks (LABs).
LA4064V-75TN44E Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~125°C TA
44 pin count
44 pins
4 logic blocks (LABs)
LA4064V-75TN44E Applications
There are a lot of Lattice Semiconductor Corporation LA4064V-75TN44E CPLDs applications.
- Address decoders
- Power Meter SMPS
- Software Configuration of Add-In Boards
- Storage Cards and Storage Racks
- STANDARD SERIAL INTERFACE UART
- State machine control
- Software-Driven Hardware Configuration
- Protection relays
- Multiple Clock Source Selection
- Preset swapping
