LA6583MC-AH
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-LSOP (0.173, 4.40mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -30°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Applications | DC Motors, General Purpose |
| Technology | Bipolar |
| Voltage - Supply | 2.8V~14V |
| Base Part Number | LA6583 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Interface | Logic |
| Nominal Supply Current | 9mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 800mW |
| Output Current | 800mA |
| Halogen Free | Halogen Free |
| Output Current per Channel | 800mA |
| Collector Emitter Voltage (VCEO) | 14V |
| Max Collector Current | 800mA |
| Voltage - Load | 2.8V~14V |
| Motor Type | Brushless DC (BLDC) |
| Load Type | Inductive |
| Height | 1.5mm |
LA6583MC-AH Overview
For packaging, Tape & Reel (TR) is used.H bridge is included in the 10-LSOP (0.173, 4.40mm Width) package as a cost-saving measure.Bridge driver is possible to improve the reliabilbridge drivery of 2.8V~14V by increasing the supply voltage.H bridge circuit is put into place according to the way of Surface Mount.As long as -30°C~150°C TJ operates at the right temperature, motor driver H bridge will operate normally.DC Motors, General Purpose is pretty useful in a variety of applications.The board is mounted using Surface Mount.In signal interfaces, 10 pins serve as pronged contacts.The LA6583 base H bridge ic number is the key to finding more related H bridge ics.Through the output and power supply pins, a current of 800mA is flowing.It is made up of two 10 pins that work together to perform the specific functions of this bridge driver.It is equipped with a 1 output.This Hbridge releases a voltage of 15V.
LA6583MC-AH Features
Available in 10-LSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LA6583
LA6583MC-AH Applications
There are a lot of ON Semiconductor LA6583MC-AH Full Bridge Drivers, Half-Bridge Drivers applications.
- Bipolar stepper motor
- Industrial Pumps
- Voltage Regulators for DDR memory arrays
- Desktop Computers
- Quad DC motor
- V-Core
- Notebook Computers
- OA equipments
- High-Current DC-DC Point-of-Load Converters
- Telecom Microprocessor
