LAMXO1200E-3FTN256E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | LA-MachXO |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LAMXO1200 |
| Pin Count | 256 |
| Number of Outputs | 211 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Number of I/O | 211 |
| Nominal Supply Current | 18mA |
| Memory Type | SRAM |
| Clock Frequency | 25MHz |
| Propagation Delay | 5.1 ns |
| Number of Logic Elements/Cells | 1200 |
| Screening Level | AEC-Q100 |
| Number of Logic Blocks (LABs) | 540 |
| Output Function | MACROCELL |
| Number of Macro Cells | 600 |
| Voltage Supply - Internal | 1.14V~1.26V |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LAMXO1200E-3FTN256E Overview
The mobile phone network has 600 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 256-LBGA package.As you can see, this device has 211 I/O ports programmed into it.It is programmed to terminate devices at [0].The terminal position of this electrical component is BOTTOM.An electrical supply voltage of 1.2V is used to power it.This part is included in Field Programmable Gate Arrays.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to -40°C~125°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.This type of FPGA is a part of the LA-MachXO series.Chips are programmed with 256 pins.In accordance with the [0], its related parts are listed.Optimal efficiency requires a supply voltage of [0].For data storage, SRAMis adopted.This electronic part is mounted in the way of Surface Mount.This board has 256 pins.There is a maximum supply voltage of 1.26Vwhen the device is operating.In order for it to operate, a supply voltage of 1.14Vis required.It consists of 540 logic blocks (LABs).As a fundamental building block, there are 1200 logic elements/cells.The clock frequency should not exceed 25MHz.The output configuration is set to [0].
LAMXO1200E-3FTN256E Features
256-LBGA package
211 I/Os
The operating temperature of -40°C~125°C TA
256 pin count
256 pins
540 logic blocks (LABs)
211 outputs
LAMXO1200E-3FTN256E Applications
There are a lot of Lattice Semiconductor Corporation LAMXO1200E-3FTN256E CPLDs applications.
- Interface bridging
- Custom shift registers
- Cross-Matrix Switch
- Reset swapping
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Voltage level translation
- USB Bus
- Discrete logic functions
- POWER-SAVING MODES
- I/O PORTS (MCU MODULE)
